Print

Care & Maintenance

© Marti157900 | www.stockfreeimages.com

All relaxation, therapeutic and bathing products may be used in Aquator baths. All you have to do is check that the bath shell and equipment are clean, and follow the procedure below if necessary.

Cleaning the bath shell

Use a soft cloth or sponge and non-abrasive cleaning agents to clean the bath shell.
Do not use washing powder, abrasive paste or abrasive cleaning liquids, rough materials and highly acidic cleaning agents, which would damage the chrome surfaces of the accessories, to clean the bath shell!

Aquator offers an excellent, tried and tested acrylic bath-cleaning agent: 

Bath Cleaner with natural Carnauba wax
General
Cleans the surface of the bath and prevents the growth of bacteria and algae. Makes the bath fresh and clean. The bath-cleaning agent contains natural carnauba wax, which leaves the bath fresh and gives it a shiny and dirt-resistant surface. 
Use
Wet the surface of the bath using the showerhead and let it soak like laundry – it helps reduce the time required to clean the bath considerably. Put some bath-cleaning agent directly on a soft sponge and clean the bath. Rinse the sponge and put some more cleaning agent on it. Repeat as before until the bath is clean. Then rinse the bath using the showerhead. 1 litre of bath-cleaning agent can be used to clean the bath 20 times! We advise you to wear rubber gloves to avoid getting carnauba wax on your hands!
Ingredients
Fatty alcohol ethoxylate (5–10%. Xi; R36/38) Isopropanol (1%. Xi, F; 36, 37) Dipropylene glycol monomethyl ether (1–3%. Em) NTA-Na3-monohydrate (1–3%. Xn; 22, 36) Perfume essence (0.1–0.3% Em) Carnauba wax (1–3%. Em) Water (50–100%. Em).
Hazardous properties and first aid
This product should not pose a threat to health if used according to instructions and for the designated purpose. Wash with soap and water in case of contact with skin. Rinse with water for a couple of minutes in case of contact with eyes. Rinse mouth if swallowed, seek medical assistance if swallowed in large quantity. Give water and induce vomiting. Seek medical assistance in the case of persisting irritation of the eyes, nausea or skin irritation. Give fresh air in case of inhalation. Keep out of reach of children.
Medical information
This product is not highly toxic. Threat of chemical pneumonia if swallowed. The acute toxic effect of the product is low and it is not absorbed through the nose in acute toxic quantities.
Handling and storage
Special safety measures are not necessary when handling the product.
Contacts
For further information please call + 372 621 8500

Washing the bath’s massage system with a disinfectant

Wash the massage system of the bath with a bath disinfectant after ten uses.

Aquator offers an excellent, tried and tested massage system disinfectant:

Desinfection liquid
Use
Use to clean the massage system after ten uses. Fill the bathtub with water so that the top massage jets are under ~5 cm of water. Water left in the tub after a bath may also be used. Add ~1 dl (100 ml) of disinfectant to 100 l of bath water. Turn on the massage system for ~1 min. Leave the solution for ~30 min. Repeat the procedure 5 times. Leave the water in the bathtub for a couple of hours, preferably overnight. Drain the water from the bathtub. Rinse the bath using the showerhead. Fill the bathtub with cold water so that the jets are under ~5 cm of water. Turn on the bathtub for ~1 minute. Drain the bathtub.
Ingredients
n-alkyl dimethyl benzyl ammonium chloride (1–5%. C; 22, 34) n-alkyl dimethyl ethyl benzyl ammonium chloride (1–5%. C; 22, 34) isopropyl alcohol (1–3%. V, F; 11, 321, 322) Water (50–100%. Em)
Hazardous properties and first aid
This product should not pose a threat to health if used according to instructions and for the designated purpose. Wash with soap and water in case of contact with skin. Rinse with water for a couple of minutes in case of contact with eyes. Rinse mouth if swallowed. Seek medical assistance in the case of persistent irritation of the eyes, nausea or skin irritation.
Keep out of reach of children!
Medical information
This product is not highly toxic. Threat of chemical pneumonia if swallowed.
Handling and storage
Special safety measures are not necessary when handling the product.
Contacts
For further information please call +372 621 8500
CLEAN AS NECESSARY IF DIRT ACCUMULATES IN THE PIPES OF THE MASSAGE SYSTEM BEFORE THE RECOMMENDED TEN USES!

Washing the bath’s massage system with a limescale remover

Wash the massage system of the bathtub with a limescale remover after forty uses.

Aquator offers an excellent, tried and tested limescale remover: 

Scale remover – universal bath and massage system cleaner
Use
Use the product after using the bath 40 times. Sprinkle ~1 kg of the product on the bottom of the bathtub and dissolve using warm water from showerhead. Fill the bathtub with warm water. You may use the water left in the tub after a bath.

Turn on the bathtub for ~1 minute. Leave the water for ~30 min. Repeat the procedure 5 times. Leave the water in the tub for a couple of hours, preferably overnight. Drain the bathtub and rinse using the showerhead. Fill the bathtub with cold water. Turn on the pump for ~1 min. Drain the bathtub.
Ingredients
Sulfamic acid (50–100%. Xi, R36/R38), Citric acid monohydrate (1–5%. Xi, 36) Sebacic acid sodium salt (0.1–1% Em).
Hazardous properties and first aid
Irritates eyes and skin. This product should not pose a threat to health if used according to instructions and for the designated purpose. Inhaling non-dissolved powder may cause coughing and searing pain. Wash with water and soap in case of contact with skin, rinse eyes with plenty of water in case of contact with eyes. Avoid vomiting if swallowed. Drink plenty of water. Seek medical assistance if symptoms persist. Keep out of reach of children!
Medical information
This product is not highly toxic. There is no acute threat of poisoning.
Fire safety
Not flammable.
General
The product is not a hazard to the environment when used in ordinary quantities. The product may be flushed through the sewerage system if this is not prohibited by local rules.
Contacts
For further information please call + 372 621 8500
CLEAN AS NECESSARY IF DIRT ACCUMULATES IN THE PIPES OF THE MASSAGE SYSTEM BEFORE THE FORTIETH USE!

Removing limescale from bath shell and accessories

We advise you to do the following to remove tough limescale deposits from the bath shell or accessories (control buttons, jet covers, plug hole, mixer tap, etc.) that are too difficult to remove with acrylic bath cleaner "Bath Cleaner with natural Carnauba wax":

Dissolve some Scale remover – universal bath and massage system cleaner in a spray bottle and spray the solution on dirty surfaces.

You can repeat the procedure another 2–3 or more times depending on how much limescale there is.

Rinse the cleaned surfaces with water using the showerhead after the end of the "sizzling" noise, which indicates reaction between the limescale remover and the limescale.

Then wipe the surfaces with a sponge using the acrylic bath cleaner "Bath Cleaner with natural Carnauba wax".

We advise wearing rubber cloves when cleaning!

WARNING!

THE TEMPERATURE OF THE WATER USED TO FILL THE BATHTUB MAY NOT EXCEED 60°C!

Do not pour boiling water in the bathtub!